Sale!

Standard UFH Mat

£81.59£414.00 Inc Vat

The UFHD Standard mat makes a warm floor underfoot an affordable luxury, making any floor surface in any room a joy to walk on.

Powerful 160watts/m² output to warm even the thickest tile

Choose from Mats 1-10m²

Clear
SKU: standard Category:

Description

UFHD Standard Mat 160

The UFHD Standard mat makes a warm floor underfoot an affordable luxury, making any floor surface in any room a joy to walk on.

It is widely accepted that heating mats are superior to loose cable systems, as they are much quicker to install and have regulated cable widths, so you always get a good even heat spread with no hot or cold spots.

The UFHD Standard mat has a fabric backing allowing adhesives to be fully absorbed, thereby allowing a perfect bond between the tiles and subfloor. Other underfloor heating mats are comprised of cables crudely stuck onto plastic/fibreglass with sticky tape, tests have shown that this can create a barrier between the subfloor and the floor finish and so the tiles stick to the underfloor heating system rather than the subfloor.

  • Fabric backing for better installation
  • Powerful 160watts/m² output to warm even the thickest tile
  • Only one connection cable for easy installation
  • Only 3mm thick
  • Surpasses international safety standards
  • 10 year guarantee
  • No electro magnetic field

Mats are 50cm wide.

SizeProduct codesDimensions
1.0m2STAN0101600.5 x 2.0m
1.5m2STAN0151600.5 x 3.0m
2.0m2STAN0201600.5 x 4.0m
2.5m2STAN0251600.5 x 5.0m
3.0m2STAN0301600.5 x 6.0m
4.0m2STAN0401600.5 x 8.0m
5.0m2STAN0501600.5 x 10.0m
6.0m2STAN0601600.5 x 12.0m
7.0m2STAN0701600.5 x 14.0m
8.0m2STAN0801600.5 x 16.0m
9.0m2STAN0901600.5 x 18.0m
10.0m2STAN1001600.5 x 20.0m

Standards

  • Tested in accordance with National and International Standards for safety (IEC, VDE, SEMKO, UL, etc.).
  • Fulfills the INCIRP guidelines and regulations in regards to the EMF (Electromagnetic Fields).
  • Complies with wiring rules regarding EMC (Electromagnetic Compatibility).
  • Should be installed in accordance with National and Local Electrical Codes.
  • Always read the installation Instructions.
Technical data
Output cable11 W/m
Voltage230 V~
Outer insulationPVC
Thickness of mat/wire~ 3.3 mm
Protection classI + 30mA RCD
ConnectionsOne side connection
Net colourWhite – textile
Cable colorRed
Space between heating wires7 cm
Supply lead length4.0m
Width500mm
Sizes available1-10m²

Additional information

Under Floor Heating

1.5m² Mat, 10m² Mat, 1m² Mat, 2.5m² Mat, 2m² Mat, 3m² Mat, 4m² Mat, 5m² Mat, 6m² Mat, 7m² Mat, 8m² Mat, 9m² Mat